Unix/Linux系統調用
accept()函數 Unix/Linux
access()函數 Unix/Linux
acct()函數 Unix/Linux
add_key()函數 Unix/Linux
adjtimex()函數 Unix/Linux
afs_syscall()函數 Unix/Linux
alarm()函數 Unix/Linux
alloc_hugepages()函數 Unix/Linux
arch_prctl()函數 Unix/Linux
bdflush()函數 Unix/Linux
bind()函數 Unix/Linux
break未實現 Unix/Linux
brk()函數 Unix/Linux
cacheflush()函數 Unix/Linux
chdir()函數 Unix/Linux
chmod()函數 Unix/Linux
chown()函數 Unix/Linux
chroot()函數 Unix/Linux
clone()函數 Unix/Linux
close()函數 Unix/Linux
connect()函數 Unix/Linux
create_module()函數 Unix/Linux
open()函數 Unix/Linux
dup2()函數 Unix/Linux
dup()函數 Unix/Linux
epoll_create()函數 Unix/Linux
epoll_ctl()函數 Unix/Linux
epoll_wait()函數 Unix/Linux
execve()函數 Unix/Linux
exit_group函數 Unix/Linux
_exit()函數 Unix/Linux
exit()函數 Unix/Linux
faccessat()函數 Unix/Linux
fattach()函數 Unix/Linux
fchdir()函數 Unix/Linux
fchmodat()函數 Unix/Linux
fchmod()函數 Unix/Linux
fchownat()函數 Unix/Linux
fchown()函數 Unix/Linux
fcntl()函數 Unix/Linux
fdatasync()函數 Unix/Linux
fdetach()函數 Unix/Linux
flock()函數 Unix/Linux
fork()函數 Unix/Linux
alloc_hugepages()函數 Unix/Linux
fstatat()函數 Unix/Linux
statfs()函數 Unix/Linux
stat()函數 Unix/Linux
statvfs()函數 Unix/Linux
fsync()函數 Unix/Linux
truncate()函數 Unix/Linux
futex()函數 Unix/Linux
futimesat()函數 Unix/Linux
getcontext()函數 Unix/Linux
getcwd()函數 Unix/Linux
getdents()函數 Unix/Linux
getdomainname()函數 Unix/Linux
getdtablesize()函數 Unix/Linux
getgid()函數 Unix/Linux
getuid()函數 Unix/Linux
getgroups()函數 Unix/Linux
getgroups()函數 Unix/Linux
gethostname()函數 Unix/Linux
getitimer()函數 Unix/Linux
get_kernel_syms()函數 Unix/Linux
unimplemented()函數 Unix/Linux
getpagesize()函數 Unix/Linux
getpeername()函數 Unix/Linux
setpgid()函數 Unix/Linux
getpgrp()函數 Unix/Linux
getpid()函數 Unix/Linux
getpmsg()函數 Unix/Linux
getppid()函數 Unix/Linux
getpriority()函數 Unix/Linux
getresuid()函數 Unix/Linux
getrlimit()函數 Unix/Linux
get_robust_list()函數 Unix/Linux
getrusage()函數 Unix/Linux
getsid()函數 Unix/Linux
getsockname()函數 Unix/Linux
getsockopt()函數 Unix/Linux
get_thread_area()函數 Unix/Linux
gettid()函數 Unix/Linux
gettimeofday()函數 Unix/Linux
getuid()函數 Unix/Linux
getunwind()函數 Unix/Linux
gtty()函數 Unix/Linux
idle()函數 Unix/Linux
outb()函數 Unix/Linux
inb_p()函數 Unix/Linux
inl()函數 Unix/Linux
inl_p()函數 Unix/Linux
inotify_add_watch()函數 Unix/Linux
inotify_init()函數 Unix/Linux
inotify_rm_watch()函數 Unix/Linux
outb()函數 Unix/Linux
insl()函數 Unix/Linux
insw()函數 Unix/Linux
intro()函數 Unix/Linux
inw()函數 Unix/Linux
inw_p()函數 Unix/Linux
io_cancel()函數 Unix/Linux
ioctl()函數 Unix/Linux
ioctl_list()函數 Unix/Linux
io_destroy()函數 Unix/Linux
io_getevents()函數 Unix/Linux
ioperm()函數 Unix/Linux
iopl()函數 Unix/Linux
ioprio_set()函數 Unix/Linux
io_setup()函數 Unix/Linux
io_submit()函數 Unix/Linux
ipc()函數 Unix/Linux
isastream()函數 Unix/Linux
kexec_load()函數 Unix/Linux
keyctl()函數 Unix/Linux
kill()函數 Unix/Linux
killpg()函數 Unix/Linux
lchown()函數 Unix/Linux
linkat()函數 Unix/Linux
link()函數 Unix/Linux
listen()函數 Unix/Linux
_llseek()函數 Unix/Linux
llseek()函數 Unix/Linux
lock()函數 Unix/Linux
lookup_dcookie()函數 Unix/Linux
lseek()函數 Unix/Linux
lstat()函數 Unix/Linux
madvise()函數 Unix/Linux
mincore()函數 Unix/Linux
mkdirat()函數 Unix/Linux
mkdir()函數 Unix/Linux
mknod()函數 Unix/Linux
mlockall()函數 Unix/Linux
mlock()函數 Unix/Linux
mmap2()函數 Unix/Linux
mmap()函數 Unix/Linux
modify_ldt()函數 Unix/Linux
mount()函數 Unix/Linux
move_pages()函數 Unix/Linux
mprotect()函數 Unix/Linux
mpx()函數 Unix/Linux
mq_getsetattr()函數 Unix/Linux
mremap()函數 Unix/Linux
msgctl()函數 Unix/Linux
msgget()函數 Unix/Linux
msgop()函數 Unix/Linux
msgsnd()函數 Unix/Linux
msync()函數 Unix/Linux
multiplexer()函數 Unix/Linux
munlockall()函數 Unix/Linux
munlock()函數 Unix/Linux
munmap()函數 Unix/Linux
nanosleep()函數 Unix/Linux
_newselect()函數 Unix/Linux
nfsservctl()函數 Unix/Linux
nice()函數 Unix/Linux
obsolete()函數 Unix/Linux
oldfstat()函數 Unix/Linux
oldlstat()函數 Unix/Linux
oldolduname()函數 Unix/Linux
oldstat()函數 Unix/Linux
olduname()函數 Unix/Linux
openat()函數 Unix/Linux
open()函數 Unix/Linux
outb()函數 Unix/Linux
outb_p()函數 Unix/Linux
outsb()函數 Unix/Linux
outsl()函數 Unix/Linux
outsw()函數 Unix/Linux
outw()函數 Unix/Linux
outw_p()函數 Unix/Linux
path_resolution()函數 Unix/Linux
pause()函數 Unix/Linux
perfmonctl()函數 Unix/Linux
personality()函數 Unix/Linux
pipe()函數 Unix/Linux
pivot_root()函數 Unix/Linux
poll()函數 Unix/Linux
posix_fadvise()函數 Unix/Linux
ppoll()函數 Unix/Linux
prctl()函數 Unix/Linux
pread()函數 Unix/Linux
prof()函數 Unix/Linux
pselect()函數 Unix/Linux
ptrace()函數 Unix/Linux
putmsg()函數 Unix/Linux
putpmsg()函數 Unix/Linux
pwrite()函數 Unix/Linux
query_module()函數 Unix/Linux
quotactl()函數 Unix/Linux
readahead()函數 Unix/Linux
readdir()函數 Unix/Linux
read()函數 Unix/Linux
readlinkat()函數 Unix/Linux
readlink()函數 Unix/Linux
readv()函數 Unix/Linux
reboot()函數 Unix/Linux
recvfrom()函數 Unix/Linux
recv()函數 Unix/Linux
recvmsg()函數 Unix/Linux
remap_file_pages()函數 Unix/Linux
renameat()函數 Unix/Linux
rename()函數 Unix/Linux
request_key()函數 Unix/Linux
rmdir()函數 Unix/Linux
sbrk()函數 Unix/Linux
sched_setaffinity()函數 Unix/Linux
sched_getparam()函數 Unix/Linux
sched_get_priority_max()函數 Unix/Linux
sched_get_priority_min()函數 Unix/Linux
sched_setscheduler()函數 Unix/Linux
sched_rr_get_interval()函數 Unix/Linux
sched_setparam()函數 Unix/Linux
sched_yield()函數 Unix/Linux
security()函數 Unix/Linux
select()函數 Unix/Linux
select_tut()函數 Unix/Linux
semctl()函數 Unix/Linux

msgsnd()函數 Unix/Linux

msgsnd - 消息操作

內容簡介

#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/msg.h>

int msgsnd(int msqid**,** const void **msgp*, size_t msgsz**,** int msgflg**);**

ssize_t msgrcv(int msqid**,** void **msgp*, size_t msgsz**,** long msgtyp**,** int msgflg**);**

描述

The  msgsnd () and  msgrcv () system calls are used, respectively, to send messages to, and receive messages from, a message queue. The calling process must have write permission on the message queue in order to send a message, and read permission to receive a message.

The msgp argument is a pointer to caller-defined structure of the following general form:

        struct msgbuf { 

                long    mtype;   /* message type, must be > 0 */ 

                char    mtext[1];        /* message data */ 

        };

The mtext field is an array (or other structure) whose size is specified by msgsz, a non-negative integer value. Messages of zero length (i.e., no mtext field) are permitted. Themtype field must have a strictly positive integer value. This value can be used by the receiving process for message selection (see the description of msgrcv() below).

The msgsnd() system call appends a copy of the message pointed to by msgp to the message queue whose identifier is specified by msqid.

If sufficient space is available in the queue, msgsnd() succeeds immediately. (The queue capacity is defined by the msg_bytes field in the associated data structure for the message queue. During queue creation this field is initialised to MSGMNB bytes, but this limit can be modified using msgctl().) If insufficient space is available in the queue, then the default behaviour of msgsnd() is to block until space becomes available. IfIPC_NOWAIT is specified in msgflg, then the call instead fails with the error EAGAIN.

A blocked msgsnd() call may also fail if the queue is removed (in which case the system call fails with errno set to EIDRM), or a signal is caught (in which case the system call fails with errno set to EINTR). (msgsnd and msgrcv are never automatically restarted after being interrupted by a signal handler, regardless of the setting of theSA_RESTART flag when establishing a signal handler.)

Upon successful completion the message queue data structure is updated as follows:

標籤

描述

 

msg_lspid is set to the process ID of the calling process.

 

msg_qnum is incremented by 1.

 

msg_stime is set to the current time.

The system call msgrcv() removes a message from the queue specified by msqid and places it in the buffer pointed to msgp.

The argument msgsz specifies the maximum size in bytes for the member mtext of the structure pointed to by the msgp argument. If the message text has length greater than msgsz, then the behaviour depends on whether MSG_NOERROR is specified inmsgflg. If MSG_NOERROR is specified, then the message text will be truncated (and the truncated part will be lost); if MSG_NOERROR is not specified, then the message isn’t removed from the queue and the system call fails returning -1 with errno set toE2BIG.

The argument msgtyp specifies the type of message requested as follows:

 

If msgtyp is 0, then the first message in the queue is read.

 

If msgtyp is greater than 0, then the first message in the queue of type msgtyp is read, unless MSG_EXCEPT was specified inmsgflg, in which case the first message in the queue of type not equal to msgtyp will be read.

 

If msgtyp is less than 0, then the first message in the queue with the lowest type less than or equal to the absolute value ofmsgtyp will be read.

The msgflg argument is a bit mask constructed by ORing together zero or more of the following flags:

IPC_NOWAIT

 

Return immediately if no message of the requested type is in the queue. The system call fails with errno set to ENOMSG.

MSG_EXCEPT

 

Used with msgtyp greater than 0 to read the first message in the queue with message type that differs from msgtyp.

MSG_NOERROR

 

To truncate the message text if longer than msgsz bytes.

If no message of the requested type is available and IPC_NOWAIT isn’t specified inmsgflg, the calling process is blocked until one of the following conditions occurs:

 

A message of the desired type is placed in the queue.

 

The message queue is removed from the system. In this case the system call fails with errno set to EIDRM.

 

The calling process catches a signal. In this case the system call fails with errno set to EINTR.

Upon successful completion the message queue data structure is updated as follows:

 

msg_lrpid is set to the process ID of the calling process.

 

msg_qnum is decremented by 1.

 

msg_rtime is set to the current time.

返回值

On failure both functions return -1 with  errno  indicating the error, otherwise  msgsnd () returns 0 and  msgrcv () returns the number of bytes actually copied into the  mtext array.

錯誤

When  msgsnd () fails,  errno  will be set to one among the following values:

標籤

描述

EACCES

The calling process does not have write permission on the message queue, and does not have the CAP_IPC_OWNERcapability.

EAGAIN

The message can’t be sent due to the msg_qbytes limit for the queue and IPC_NOWAIT was specified in msgflg.

EFAULT

The address pointed to by msgp isn’t accessible.

EIDRM

The message queue was removed.

EINTR

Sleeping on a full message queue condition, the process caught a signal.

EINVAL

Invalid msqid value, or non-positive mtype value, or invalidmsgsz value (less than 0 or greater than the system valueMSGMAX).

ENOMEM

The system does not have enough memory to make a copy of the message pointed to by msgp.

When msgrcv() fails, errno will be set to one among the following values:

E2BIG

The message text length is greater than msgsz andMSG_NOERROR isn’t specified in msgflg.

EACCES

The calling process does not have read permission on the message queue, and does not have the CAP_IPC_OWNERcapability.

EAGAIN

No message was available in the queue and IPC_NOWAIT was specified in msgflg.

EFAULT

The address pointed to by msgp isn’t accessible.

EIDRM

While the process was sleeping to receive a message, the message queue was removed.

EINTR

While the process was sleeping to receive a message, the process caught a signal.

EINVAL

msgqid was invalid, or msgsz was less than 0.

ENOMSG

IPC_NOWAIT was specified in msgflg and no message of the requested type existed on the message queue.

遵循於

SVr4, POSIX.1-2001.

注意

The  msgp  argument is declared as  struct msgbuf *  with libc4, libc5, glibc 2.0, glibc 2.1. It is declared as  void *  with glibc 2.2 and later, as required by SUSv2 and SUSv3.

The following limits on message queue resources affect the msgsnd() call:

標籤

描述

MSGMAX

Maximum size for a message text: 8192 bytes (on Linux, this limit can be read and modified via /proc/sys/kernel/msgmax).

MSGMNB

Default maximum size in bytes of a message queue: 16384 bytes (on Linux, this limit can be read and modified via*/proc/sys/kernel/msgmnb*). The superuser can increase the size of a message queue beyond MSGMNB by a msgctl() system call.

The implementation has no intrinsic limits for the system wide maximum number of message headers ( MSGTQL ) and for the system wide maximum size in bytes of the message pool ( MSGPOOL ).

另請參閱

  • msgctl (2)

  • msgget (2)

  • msgrcv (2)

  • msgsnd (2)